Elliott Sound Products Project 127 - Dual TDA7293 Amplifier 

This board is for a two channel TDA7293 IC power amplifier. All components and optional connectors mount on the PCB, which is powered from +/-35V to deliver 70W nominal into 8 ohm speaker loads. Unlike most ESP boards, this one is double-sided with plated-through holes. Be careful during assembly, because rework will almost certainly damage the PCB unless you have experience with double-sided boards.

The layout (marked as P127 Rev-) contains two amplifiers, and is identical to the description in the project article.

Order CodeP127
Size (mm)77 x 31