Elliott Sound Products Project 3A Power Amplifier (Rev-C)

The boards and circuit for this project are the same as the published design, and the supplied circuit and BOM reflect the schematic. This a very easy amplifier to build, but it has excellent performance.

The layout comprises two amplifiers, individually fused on board. The board is designed to be able to be cut down the middle for separate amplifiers. Flat-pack transistors are used, mounted under the board for the simplest mounting possible. The edge of the board can be cut off and TO-3 transistors can be used.

This project has proven to be very popular, and a great many constructors have commented extremely favourably on the sound quality of the amp. This is not an amplifier to be under-estimated, and is highly recommended for serious hi-fi.

Order CodeP3A
Size (mm)162 x 74